Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who have lost their keys to their car may be concerned about the cost and hassle of getting another one. You can cut down on these costs by making your own key fob.
To do this, you'll require a flathead screwdriver. Put the flathead screwdriver into the slot located at the middle of the case, and then slowly lift it.
Cost
Most SAABs have two keys when new, however certain used vehicles only have one. In this instance, the owner must get an additional key, which is costly. There are many methods to save money on this procedure. For instance, if you just require a new key fob case You can save money by buying an older case from an auto dealer. These cases do not have the emergency badge or key, and they tend to wear out fast.
In addition to the cost of buying a new key, you must also pay for the installation and programming of the TWICE module. These costs can add up quickly particularly if you don't have a spare.
This is why it is essential that you always have at least two keys for your vehicle. If you lose the only key, you won't be stranded with no transportation.
The good news is that adding a second key to your Saab 9-3 doesn't have to be so difficult as it could seem. The only problem with this is that the key has to be paired with the car's computer. This can be done through a dealer however it may take some time to set up an appointment. Fortunately, you can find the necessary information online to aid you with the process.
Installation
Most Saab vehicles built after 1995 have an immobilizer system that makes use of a key-fob to control the car's engine. G28CarKeys controls remote and door locks for the vehicle. It is important to keep a spare key on hand to prevent losing the original and having your car stolen. The good news is that if you lose your only working Saab key there are options to get it replaced without having to pay for the expense of a dealer service.
First, you need to prepare the new keyfob. This can be done by using an flathead screwdriver to open the case open. Place the screwdriver in the small hole in the middle of the case, and gently move the screwdriver. If you're having trouble, try using different angles. After you've opened the case, you can take out the electronics and put them in a brand-new fob case.
You can begin the programming process once you have the replacement key and fob. You'll need to connect your Tech2 and then follow the instructions for NG 9-3 either with or without the transponder. It is recommended to use a replacement device TWICE, which is fitted with the correct transponder and key. You can find such a unit online however, you must be sure that the replacement is an OEM part.
Programming
In general, adding an additional key for the Saab 9-3 will require an instrument called Tech 2. Tech 2. It also involves programming the car to recognize the new key. This is a far more complex process than just copying a metal key. It must be carried out by a professional in order to not harm the electronic system of the vehicle. If you're considering acquiring the spare key to your car, it's best to do it as quickly as you can. If you put off, it could cost a lot more in the future.
You'll also have to replace either the CIM or TWICE modules. It's a process that requires mail order and not something you can buy from an aftermarket dealer. The cost of purchasing a new automobile can be expensive depending on the car model.
There's an alternative to the dealer that is charging you the highest dollar to replace your vehicle's computer. S.A. Locksmith & Security will re-program your Saab computer to prepare it for the new key. This will help you save the cost of a new car computer. This service is quick, easy and inexpensive. You will save up to 50% of what an auto dealer would charge. This is a great solution for those who have lost their car keys.
Remotes
The Saab 9-3 Viggen was among the most distinctive cars to ever sport the Saab badge. It was a Scandinavian front-drive fighter jet-inspired monster that was quick and enjoyable to drive. There were many other Saab models followed, but few were as original.
It is essential to replace your Saab 9-3's key fob in the event that you lose it. In contrast to the more typical European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a distinct key to begin. The replacement process is easy if you own an extra key, however it can be expensive and long-winded if you don't own an extra.
You can save money when you purchase an old key fob and then have it programmed locally by locksmiths. However, you must be careful about purchasing used keys on eBay as well as other online marketplaces. They may not be authentic and you may end up paying more in the long run.
Removing the electronics and battery from the old key fob is an easy procedure that anyone can perform with a small flathead screwdriver. Be cautious not to cause damage to the small electronic components inside the case. Do not pour liquids into the case, as this could cause damage. Also, avoid buying cloned keys through aftermarket sellers, since they may not have been paired with the CIM of the car you own.